PY and PYE Electric Hydraulic Power Pack

Single and Double Acting

Model: PY and PYE

Manufacturer: Yale (Germany)

Reservoir Capacity: 5 litres, 6.5 litres and 10 litres

Maximum operating pressure 700 bar


Product Overview

Single-stage and two-stage

Power packs are easy to operate as they are fully assembled and easy to control.

The use of power packs is always recommended when jobs have to be done in a time-saving and efficient way, when repeating jobs have to be finished off, quick cylinder cycles have to be achieved or if large oil volumes in connection with high-tonnage cylinders have to be transmitted.


Two-stage output

The standard power packs are equipped with two-stage pumps, which means that a low pressure stage fills the connected hydraulic cylinder quickly up to a pressure of 80 bar. The high pressure stage is activated automatically from 80 bar up to 700 bar, while the low pressure stage is discharged back to the reservoir. This economic solution avoids heating-up, saves energy and keeps the power packs compact.


Single-stage output model PYE

The hydraulic packs have single-stage pumps. These packs deliver between 0 and 700 bar with the same volume (high-pressure stage).



The motion control of the connected hydraulic cylinder is done by operating the directional valve.


Do you have a single-acting or a double-acting hydraulic cylinder?

The directional control valve has to correspond to the a.m. functional principle of the hydraulic cylinder to be operated. Depending on these principles the power packs are equipped with a:

  • 3/3-way valve to operate single-acting hydraulic cylinders (connection with one hydraulic hose)
  • 4/3-way valve to operate double-acting hydraulic cylinders (connection with two hydraulic hoses

The directional control valves are available either as manual or solenoid operated valves.


Operation of the directional valves

Depending on the way of operation, there are manual or solenoid operated valves. Manual valves are controlled by shifting the operating lever and represent the economic way of control.

These valves have 3 lever positions: – advance – hold – retract –


Solenoid valves

Solenoid valves have the advantage that they are controlled by a pendant remote control box which makes the operator independent from the power pack, making it easier for him to monitor the job.

The solenoid valves are controlled by two push-buttons – advance – hold – retract –

In neutral position – hold – the valves rest in pressureless circuit. Pressure and force of the connected cylinder are held without pressure drop. The complete electrical set-up (with 24 V control) belongs to the scope of delivery.

Solenoid valves allow a very ergonomic operation and offer a quick and precise switching (millimeterwise) of the connected hydraulic cylinder.


Pressureless circuit

In neutral position all directional valves rest in pressureless circuit which means that the oil flow coming from the rotating pump is guided back to the reservoir without creating any pressure build-up.


Special solenoid valve configurations

Some applications require a special valve configuration, e.g. the independent control of several hydraulic cylinders from a single power pack. In such cases the complete valve build-up and electrical control is designed according to customer‘s requirements.


Pressure-Guard power packs

By using an electro-hydraulic pressure switch and a special electric control, power packs automatically control their pre-adjusted pressure. In applications where the pressure (load) should be applied over a very long period, the connected power pack is switched on and off automatically and replaces the pre-set pressure in case a pressure drop has occured.



For all power packs we offer a cart-frame for flexible movement from job to job. Cart-frames are equipped with 2 fixed and 2 swivel castors.


Oil cooler

For certain applications, especially when power packs are continuously operated and the oil temperature could exceed 60 °C, the use of an oil cooler is recommended.


Hydraulic oil

All power packs are designed for an operation with standard hydraulic oil (specification ISO VG 32). For certain operating conditions the viscosity class of the hydraulic fluid can be varied. All power packs are supplied including oil.



  • Robust packs, also capable for contiuous applications.
  • Suitable for all jobs in workshops and on construction sites where hydraulic force is required; supplied ready to use.
  • On-off motor switch and 3 m motor connecting cable.
  • With carrying handles, oil level gauge, oil filler/reservoir ventilation plug.
  • pressure gauge GGY-631.
  • Two-stage displacement, which means a rapid advance without load, as well as an automatic switch into the 2. phase by a congruous load.
  • Low noise level due to standard motors with 1450 rpm.
  • Futher motor voltage and oil resevoirs on request.
  • With manual or solenoid operated directional valves.
  • Solenoid valves with 3 m remote control box (with 2 push-buttons) and pressure set valve as standard. Adjustable from 0-700 bar.
  • 24 V – low voltage control includes a sturdy metal electric control box and ready to use set up.

How much does delivery cost?

There are three parcel sizes: small, medium and large. Prices, based on location, for each parcel size are as shown below.

Small: 0 to 20 kg

Medium: 20 kg to 40 kg

Large: 40 kg +

There is only one parcel charge per order.

Your delivery charge is calculated during checkout.






Collect From Hoist & Winch Limited - Redditch




Freight Delivery

UK Mainland


Export orders outside of UK mainland your carriage cost will be quoted separately after order placement. For very large order sizes, we reserve the right to re-quote the delivery charge before acceptance and shipment of your order.

When will I receive my order?

We will make contact with you to arrange a delivery time upon receipt of your order either by telephone or email; we will endeavour to deliver at the agreed time however, we cannot guarantee delivery dates and times as these may be affected by circumstances outside our control.

We will do our best to contact you if we are forewarned of delays.

Stock items should normally be delivered within 5 working days from date of order placement, but it may often be sooner. For non-UK-Mainland orders, delivery time may be longer.  For items currently out of stock delivery will usually be within 28 days.

For urgent orders please check for an up to date delivery time prior to order by either emailing [email protected] or telephone: 08450 171 126

Will all of my goods be sent at the same time?

We will pick all your items together and ship your order at the same time. However, depending upon the size of the order we may ship the order in more than one package. Consequently you may not receive all of the goods/packages at the same time. If you order an item which is marked 'pre-order' we will not usually dispatch your order until your whole order is ready. Please let us know if you'd like part of your order dispatching sooner, and we will of course be happy to help.

When do you normally attempt deliveries?

Small and medium parcels are usually sent by Courier. Large parcels are sent by a Pallet network courier, who deliver Monday to Friday, typically between 8:00am and 5:30pm.

Gaining Access to Delivery Address

If we are unable to gain access to the agreed delivery address we will return the goods to our warehouse and make contact with you to re-arrange delivery.  Unfortunately in these circumstances we may have to charge you a further delivery fee

How do I track my delivery's progress?

Please contact our sales team on [email protected]

Where will my order will be delivered?

Delivery will be made to the address of the registered debit/card holder used to place the order.  Alternatively, an alternative delivery address can be agreed post order, please contact via email: [email protected]


Suitable means of unloading heavy loads must be provided by the customer upon

Yale PY and PYE Portable Electric Powered Hydraulic Power Pack


Need Help?

Get in touch with us.