Jib Crane - Floor Mounted Free Standing Pillar

Jib Crane - Floor Mounted Free Standing Pillar

More Views

Floor Mounted Pillar Jib Crane



Capacities - 125 kg & 10,000 kg Swl (Other capacities available upon request)

 

Elevated boom with optimal height, slewing range 270°

 

Lightweight, twist-free steel girder construction with low headroom. The boom is fitted with a bearing, pillar made from reinforced steel pipe. Depending on the size of the hoist and in combination with festooned power cables, restrictions in the slewing range of the boom may be possible.

 

Mounting

 • Base flange with anchor bolts and template. 

• Anchoring the base plate (welded) including mortar cartridges, anchor studs (complete with nuts, locknuts and washers). 

• Anchoring the dowel base plate (bolted) including mortar cartridges, anchor studs (complete with nuts, locknuts and washers). 

• Mobile unit for changeable location.

 

Mounting

 • Base flange with anchor bolts and template. 

• Anchoring the base plate (welded) including mortar cartridges, anchor studs (complete with nuts, locknutsand washers). 

• Anchoring the dowel base plate (bolted) including mortar cartridges, anchor studs (complete with nuts, locknuts and washers). 

• Mobile unit for changeable location.

 

Scope of delivery 

• The electrical system is equipped with a lockable main switch, round-cable power supply with cable support
pipes for booms up to 4000 mm. 

• From 4500 mm upwards, the boom is equipped with a festooned cable power supply. Due to cable sag on low
cranes, we recommend the use of festooned cables even on short booms. 

• Trolley stoppers at the front and at the back. 

• Cranes are supplied with an operating manual and complete manufacturer‘s documentation.

 

Options

 • Slew stoppers (buffers) can be fitted on building site for a pre-determined fixed slewing range. 

• Slewing brake, to control the boom speed during slewing. Recommended for a boom length of more than 5 m or a headroom of more than 4 m. This prevents uncontrolled movement of the boom. 

• Increased paint layer (120 μm) or hot-dip galvanisation for outdoor use. 

• Manual locking device, to hold the boom in a fixed position (wind protection).

 • Hoist cover for outdoor use.

Recent Projects

Hoist & Winch Supply, Hire, Repair & Test Hoists, Cranes, Winch's and Lifting Equipment

If you are looking for a professional company with many years experience of all kinds of lifting & handling applications then look no further than HOIST & WINCH. We pride ourselves on the knowledge of our industry, the quality of our service and our flexible approach all designed to achieve the highest levels of customer satisfaction.

Request a Quote